WI.03Investment Casting6 models

Engineered around your process

Automode Wax Injector

Fully automatic injection with auto pattern eject.

Request a quote Talk to engineering

Clamp force: 12T / 30T
Daylight maximum: 800 / 900 mm
Single-shot capacity: 2,500 cc
Control: 15" touch screen

View 1 of Automode Wax Injector

Representative machine configuration

Verified product

01 / Overview

Engineered for repeatable production.

Automode wax injector with automatic mould close, inject, dwell, open and pattern eject — engineered for high-volume foundries.

Wax Injection Machines

02 / Model range

Compare machines in this product family.

Each model is engineered around a different tooling envelope, production volume and automation requirement.

Wax Injection Machines

Model / equipment	Primary specification	Control / configuration	Details
4-Pillar Wax InjectorWI.01	Clamp force12T – 100T	Control7" / 15.6" HMI	View model
C-Frame Wax InjectorWI.02	Clamp force12T – 100T	Control7" / 15.6" HMI	View model
Automode Wax InjectorWI.03 · Current model	Clamp force12T / 30T	Control15" touch screen	Selected
IGT Wax Injector (up to 300T)WI.04	Clamp forceUp to 300T	Clamp forceUp to 300T	View model
C-20 Wax Injection MachineWI.05	ModelC-20	ControlPLC + HMI	View model
Manual Wax Injection MachineWI.06	OperationManual / operator controlled	ControlMachine-mounted panel	View model

Final model, utilities, tooling and safety package are confirmed against the approved project requirement.

03 / Key features

Built around the process.

Fully automatic cycle

Auto pattern eject

Shipped as a plug-and-play machine

Production-ready within 48 hours of delivery

Simple, cost-effective design

Remote access for rapid support

Customised for specific industry requirements

Choice of machine colour

Configurable die-securing methods and platen sizes

Local supply voltages and country-specific parts

04 / Applications

Where this machine fits.

Typical use cases for this platform. Tooling, handling and controls are engineered around the approved production requirement.

Application 01High-volume foundries
Application 02Automotive Tier-1

05 / Technical specifications

Every model. Every critical detail.

Compare published capacity, controls, utilities and available options in one structured view. The source status is shown below; final configuration is confirmed against the approved project datasheet.

Verified source data

02
Models: 25
Parameters: 02
Data groups

Detailed specification

Verified model data21 parameters

Official product page

01AM-Mod-12T02AM-Mod-30T

All model values shown below

Technical parameter	Model 01AM-Mod-12T	Model 02AM-Mod-30T
01Clamp force (MT)	12T	30T
02Daylight maximum (mm)	800	900
03Daylight minimum (mm)	100	100
04Clearance between pillars (mm)	500 × 500	600 × 600
05Die clamping	T-slot	T-slot
06Single-shot capacity (cc)	2,500	2,500
07Wax tank capacity	120 L	120 L
08Injection nozzle type	Side	Side
09Injection pressure (bar)	3.5–70	3.5–70
10Injection rate (cc/sec)	250	250
11Pattern ejector	Included	Included
12Melter unit	Included	Included
13Vacuum wax transfer unit	Included	Included
14Spray nozzle assembly	Included	Included
15Pattern catchment tank	Included	Included
16Control system	15" touch screen	15" touch screen
17Electrical standard	380–420 V / 50 Hz / 3 phase	380–420 V / 50 Hz / 3 phase
18Air requirement	6 bar / 6 CFM	6 bar / 6 CFM
19Water requirement (LPM)	60	60
20Overall size W × D × H (mm)	4,400 × 1,800 × 2,800	4,600 × 2,100 × 3,000
21Machine weight (kg)	4,500	5,500

Clamp force (MT)

AM-Mod-12T: 12T
AM-Mod-30T: 30T

Daylight maximum (mm)

AM-Mod-12T: 800
AM-Mod-30T: 900

Daylight minimum (mm)

AM-Mod-12T: 100
AM-Mod-30T: 100

Clearance between pillars (mm)

AM-Mod-12T: 500 × 500
AM-Mod-30T: 600 × 600

Die clamping

AM-Mod-12T: T-slot
AM-Mod-30T: T-slot

Single-shot capacity (cc)

AM-Mod-12T: 2,500
AM-Mod-30T: 2,500

Wax tank capacity

AM-Mod-12T: 120 L
AM-Mod-30T: 120 L

Injection nozzle type

AM-Mod-12T: Side
AM-Mod-30T: Side

Injection pressure (bar)

AM-Mod-12T: 3.5–70
AM-Mod-30T: 3.5–70

Injection rate (cc/sec)

AM-Mod-12T: 250
AM-Mod-30T: 250

Pattern ejector

AM-Mod-12T: Included
AM-Mod-30T: Included

Melter unit

AM-Mod-12T: Included
AM-Mod-30T: Included

Vacuum wax transfer unit

AM-Mod-12T: Included
AM-Mod-30T: Included

Spray nozzle assembly

AM-Mod-12T: Included
AM-Mod-30T: Included

Pattern catchment tank

AM-Mod-12T: Included
AM-Mod-30T: Included

Control system

AM-Mod-12T: 15" touch screen
AM-Mod-30T: 15" touch screen

Electrical standard

AM-Mod-12T: 380–420 V / 50 Hz / 3 phase
AM-Mod-30T: 380–420 V / 50 Hz / 3 phase

Air requirement

AM-Mod-12T: 6 bar / 6 CFM
AM-Mod-30T: 6 bar / 6 CFM

Water requirement (LPM)

AM-Mod-12T: 60
AM-Mod-30T: 60

Overall size W × D × H (mm)

AM-Mod-12T: 4,400 × 1,800 × 2,800
AM-Mod-30T: 4,600 × 2,100 × 3,000

Machine weight (kg)

AM-Mod-12T: 4,500
AM-Mod-30T: 5,500

Configuration note: Technical figures are based on the supplied Modtech master specification sheets and are for reference. Final values may change with the approved machine configuration; contact Modtech Sales for the project datasheet.

Optional / additional features

Verified model data4 parameters